Large plastic laundry basket

Basket Drawing

This is what I planned. I decided to make a basket with a lid (so that the cat could not get close to the clothes). Of course it is not necessary. But with the help of a plastic pipe clutch, you can make interesting things.

Preparation of materials

Large basket for sorting linen from plastic pipes
I made a plastic basket frame. Below I will list what I used. All elements with a diameter of 12 mm. Pipe fasteners - they serve to fasten pipes (without interacting with the liquid in the pipes), although you can use the standard fitting for these purposes. 8 Spacers (for corners) 5 tees (for intermediate fastenings and the top part covers) 11 T-shaped couplings (for fastening the base for bags and for use as hinges for the cover) 2 (for cover corners)

Clamps

Clips will serve for fastening the fabric on the lid and bags for laundry on the frame. -12 for bags. - 12 for fabric onthe lid. -The length of the pipe. With the length of all simple. Cart meter in height and two in width. Therefore, I cut the pipe in two lengths. All pipes had a diameter of 12 mm. -16 segments of one meter each (4 for the lower part, 4 for the top, 6 for vertical posts, and 2 for the cover). -11 segments of 50 cm each (two for the bottom, 6 for the top, 3 for the cover). But you can build on the size of the bags for laundry. Other things. - 5 bags for dirty linen. - cut

Plastic Pipe Skeleton

src="https://sdelaysam-svoimirukami.ru/uploads/posts/2018-02/1517478564_7.jpg" style="max-width: 100%;" alt="A large basket for sorting clothes from plastic pipes"> Large basket for sorting linen from plastic pipes
A large basket for sorting clothes from plastic pipes
A large basket for sorting clothes from plastic pipesLarge basket for sorting the laundry from plastic pipes I started with the assembly of the bottom. Inserted vertical racks and then made the upper part of the frame. Noticeas I put on the T-shaped couplings on the pipe. On one side I used 3, and on the other 4. An additional clutch served to strengthen the middle of the cover. When choosing the length of the pipes for the cover had to think. Because the loops are slightly offset and I needed to trim one of the top tubes so that it fits with the offset. I measured this pipe already at the assembly stage, noting and sawing off its excess part with a hacksaw. I did not glue the plastic elements. Fittings and couplings held tightly.

Fixing bags and fabric for the cover

Large basket for sorting linen from plastic pipes
Large basket for sorting linen from plastic pipes
Large basket for sorting linen from plastic pipes
Large basket for sorting linen from plastic pipes
Large basket for sorting linen from plastic pipes


Related News


100 ideas how to effectively use wallpaper for the kitchen
Photos of women changing the perception of beauty
Mm, mousaka Delicious Greek dish with spicy sauce bechamel
Sirloin dress with a border. Schemes, description
Vegetable oils - information about each. Save, come in handy
Jam with secret additives: divine taste and unique aroma