New country table from old boards

Summer is a holiday time. And what kind of rest without a feast? You can certainly get acquired in the supermarket plastic table, light, openwork. However, such a table, like any thing, also has drawbacks. For example, it can flap from a gust of wind at the most inopportune moment. But everything is fixable if there is old lumber in the country. The hand-made table looks more efficient and reliable, lasts longer, it will not burst from the temperature drop and will not crack under the high pressure of the load. The cost of such a table is half an hour of time! Materials for work: • Old timber size 10 x 15 - 4 heights of table legs; • Board 40 mm thick - 2 width + 2 table lengths; • Edged board - 1 pc. 5 meters long; • Nails 120 mm long - 16 pieces; • Nails 40 mm long - 20 pieces; • Saw, hammer, brush, paints. Stages performance of work:

First stage: we form the basis.

We take the old window sill, bar, couplethick boards. To give stability to the future table in this master class, a bar and an old window sill are used. The window sill is convenient already cut out grooves. But it can easily be replaced by a bar and use only it.
 do-it-yourself dacha table
We measure 65 centimeters on the windowsill.
 country table with your own hands
Saw off two parts, each of which is 65 centimeters long.
 do-it-yourself dacha table
 do-it-yourself dacha table
60 centimeters.
country table do it yourself
Saw off two pieces of equal length.
do-it-yourself country table

Install the pieces of windowsill - the base at a short distance from each other ha. By making a small indent from the edge of the base,on the hollows of the window sill we install a leg - a bar.
 country table with your own hands
In the leg - a bar we drive in a nail (120 mm long) on ​​each side, connecting the joints of the leg with the parts window sill. We drive nails under the inclination (diagonally).
 country table with your own hands
On the opposite side, we install the second leg - a bar, likewise connecting its joints with parts of the window sill with nails.
country table with their own with hands
 private dining room with our own hands
To strengthen the connection of the parts of the table, turn over the resulting structure and hammer nails in a straight line, fixing the junction of the legs - the beam and the base - the window sill.
 country table with your own hands
The base of the table is ready.
 country table with your own hands

Second stage: we make the tabletop.

Saw off two thick boards (polo s), connect the top of the legs - bars.We nail them with 120 mm long nails, use 4 pieces.
 do-it-yourself dacha table
For the uncovered sides of the legs and bars we fasten two thick boards. The length of the boards is equal to the length of the table top (in this master class, it is one meter). Fasten nails with a length of 120 mm, use 4 pieces.
 country table with your own hands
 country table with your own hands
For on the front side of the tabletop, we use a smooth edged board.
 country table with your own hands
Sawing 5 lengths of 90 centimeters airs.
country table do it yourself
 do-it-yourself dacha table
Put the cutting of the cut board over the nailed meter pieces of thick boards (positioning them across).
 country table with your own hands
Nailing 40 millimeters long with nails it edged cutting board to two pieces meter thick board (hammering nails on both sides).We use 10 nails on each side of the table top (20 pieces in total: 2 nails on each side on each side).
 do-it-yourself dacha table
 country table with your own hands
Under the tabletop, we cut down the protruding corner of thick transverse planks (to which the front part of the tabletop is attached).
 private dining room with their own hands
Such a nice little table turns out.


Related News


Birthday greeting cards in the style of a shobby
New-year papier-mache toys
Flanelegraf
Colored glass for doors and windows - types, advantages, prices
Evolution of the thread design: it'