Repair of the computer chair shock absorber

Practically all people use computer chairs today. Equipped with such a miracle jobs in all offices, shops, supermarkets and even educational institutions. Many use them in everyday life. During operation, the computer chair, like any other thing, can break. Basically the elevator seat fails, after which it is impossible to sit. When loading, the seat is lowered to a minimum and does not adjust in any way in height. In this case, there are three options for solving this problem. The first option is to buy a new one, the second option is to replace the shock absorber and the third option is to do the repair yourself.
Repair of the computer chair shock absorber

Repair of the chair shock absorber

It is almost impossible to repair the shock absorber so that it can be adjusted in height. But you can fix it at the right height.To perform the work, you need a cross-head screwdriver, a hacksaw, a plastic or metal pipe with a diameter of 25 mm., A small spring.
Repair of a computer chair shock absorber
Repair of the computer chair shock absorber
To start the repair, you need to disconnect the seat with the backrest from the base. For this you need a Phillips screwdriver. With it, you need to unscrew the 4 fastening bolts and put the seat with the back in the side. Then you need to disconnect the shock absorber from the wheelbase of the chair. He keeps on one clip.
Repair of a computer chair shock absorber
Repair of the computer chair shock absorber
This clip is easily removed with the same Phillips screwdriver. After that, you can start repairing the shock absorber, or rather, fixing it at the required height.
Repair of the computer chair shock absorber
To fix the chair at the correct height, you need to make a spacer under the shock absorber.To do this, you can use a metal or plastic pipe with a diameter of no more than 25 mm.
Repair of a computer chair shock absorber
Repair of the computer chair shock absorber
If the diameter of the pipe is larger, the base of the shock absorber may slip into it. The hacksaw needs to saw off the necessary piece of pipe. Then put this pipe on the shock absorber rod so that it rested against the base of the shock absorber.
Repair of a computer chair shock absorber
Repair of a computer chair shock absorber
Repair of a computer chair shock absorber
Repair of the computer chair shock absorber
To prevent the chair from being too rigid, a spring can be inserted between the pipe and the base of the shock absorber. After that, put all the parts together in the same order in which it was sorted.


Related News


19 ideas rework from old services. Stop collecting dust
Decking Varieties
Super speed light-salted cucumbers in a can in 15 minutes
We solder aluminum
Christmas tree toy Santa Claus
Filigree Paper Masterpieces by Rogan Brown
Children's convertible sandbox